「沈阳厂房提升门」如何让电动提升门运行更加顺畅

「沈阳厂房提升门」如何让电动提升门运行更加顺畅


How to Make Electric Hoist Door Running Smoother in Shenyang Workshop
 

厂房使用的电动提升门具有抗风性、保温性能好，安装方式多样的优势，更具厂房的空间特点，有多种提升方式。


The electric lifting door used in the workshop has the advantages of wind resistance, good heat preservation performance and various installation methods, and has more space characteristics of the workshop.

门板厚度从40mm到120mm不等，用户根据厂房承重和需要达到的保温要求来选择，门板外板为0.326mm厚的镀锌彩钢板，内部填充聚氨酯保温发泡，具有密度大重量轻，保温效果好的特点。


The thickness of door panels varies from 40 mm to 120 mm. Users choose the door panels according to the load-bearing capacity and the thermal insulation requirements to be met. The outer panels of the door panels are 0.326 mm thick galvanized coloured steel plate, and the interior is filled with polyurethane thermal insulation foam. The door panels have the characteristics of high density, light weight and good thermal insulation effect.


关于提升门的驱动方式，以轴驱动（配重）式和平衡系统为主，两种有着各自的优势。


As for the driving mode of lifting door, the main driving modes are shaft driving (counterweight) and balancing system, which have their respective advantages.


在厂房提升门的使用过程中，难免会因为产品自身原因或操作不当，造成产品不能正常运行，或者运行不顺畅的情况，您可按照以下方法进行的保养，维护。


In the process of using the elevator door of the factory building, it is inevitable that due to the product's own reasons or improper operation, the product can not run normally or run smoothly. You can carry out maintenance and maintenance according to the following methods.

「沈阳厂房提升门」如何让电动提升门运行更加顺畅


How to Make Electric Hoist Door Running Smoother in Shenyang Workshop


电动提升门要进行维护保养的步骤：


he steps of maintenance of electric lifting door are as follows:


1、电动提升门在应用的过程中，肯定是要连结控制器还有电压的稳定，拒绝安装在环境比较潮湿的地方，由于这样会影响提升门的帮助，另外遥控器是不可以随便进行打开，如果门体的上面有着电线缠绕，打结等情况那么肯定要优秀行处理好，那么在提升门运行的时候也要注意通道有没有堵塞，有没有物体会阻碍门体下降等，如果有发明一定要先停止电机运作。


1. In the process of application of electric lifting door, it must be connected with the controller and voltage stability, refuse to install in the humid environment, because this will affect the help of lifting door, and remote control can not be opened casually, if there are wires winding and knotting on the top of the door body, then affirmative. In order to handle it well, we should also pay attention to whether the passageway is blocked and whether objects will hinder the descent of the door when the lifting door is running. If there is an invention, we must stop the operation of the motor first.


2、经常应用的电动提升门我们应该要对其检查行程的开关，还要地行程的控制器加上润滑油，这样才能让它一直连结好良好的运行，另外，如果操作人员如果需要进行手动来控制门体，那么就要了解检查器的运行情况，还要校对上下行程的开关位置，这个很重要，而且我们在检查过程中一定要严防电动提升门或冲底或者反转，如果在运行的时候发现紧急情况那么应该要停止转动，然后进行切断电源。


2. The frequently used electric lifting door should be checked by the switch of the stroke, and the controller of the stroke should be added with lubricating oil, so that it can be well connected all the time. In addition, if the operator needs to control the door manually, he should know the operation of the checker and check it. This is very important for the switch position of the upstream and downstream journey, and we must strictly guard against the electric lifting door or flushing bottom or reversing during the inspection process. If an emergency is found during operation, then we should stop turning, and then cut off the power supply.


3、每一位专门经管的操作人员非常好要经常的做好检查工作，对电动提各项门的手动开关还有手动升降装修，进行检查，这是为了防止在紧急情况下电动提升门会失灵，然后就会造成不必要的安全事故。


3. Every operator who specializes in management should do a good job of checking very often. The manual switch and lifting decoration of electric lifting doors should be checked. This is to prevent the failure of electric lifting doors in emergencies, and then cause unnecessary safety accidents.

4、经常性的对轨道进行及时的清理，这是很重要的，而且要连结轨道内部很洁净，这样才能让轨道运行畅通，电动提升门的电机和传动链接需要经常的去加润滑剂，为了让提升门的部件不会发现松动，那么做好检查是必要的，比如控制箱内器件和开关控制盒，紧固接线端口，紧固螺丝等，特别是提升门遇到灰尘污物后，按钮卡住不能反弹以是也要对按钮还有控制箱进行洁净，这样电动提升门就可以完美的连结运行畅通。


4. It is very important to clean the track regularly and keep the track clean so that the track can run smoothly. The motor and transmission links of the electric hoist door need to be lubricated regularly. In order to keep the parts of the hoist door from loosening, it is necessary to do a good job of checking. For example, the devices in the control box and the switch control box, fastening the connection port, fastening the screw, etc. Especially when the lifting door encounters dust and dirt, the button can not rebound, so the button and the control box should also be cleaned, so that the electric lifting door can run smoothly and perfectly.